Clipping one wing didn't work so....

katelk

Songster
6 Years
Joined
May 6, 2013
Messages
412
Reaction score
16
Points
111
Location
White Bluff, TN
I have some chickens who are constantly fence jumping. I already sought advice on here. I tried some additions to the fence and each time, after a day or so, they would find a new way to fly over. Finally, I decided that whoever got caught outside the fence was getting a wing clipped before going back in. I have clipped one wing on 4 birds. 2 of these birds are STILL getting over the fence.
Question is, if clipping one wing didn't work, will clipping both be more likely to work?
 
First, show a picture of outstreteched wings you clipped.


In my experience clipping two clipped wings is better than one when birds employ clambering to scale fence or other near vertical surfaces. I actually took time to compare approach to avoid assumptions about restored symmetry overriding loss of thrust / lift. Not even my games can go verticall more than 18" without assistance from wings.
 
First, show a picture of outstreteched wings you clipped.


In my experience clipping two clipped wings is better than one when birds employ clambering to scale fence or other near vertical surfaces. I actually took time to compare approach to avoid assumptions about restored symmetry overriding loss of thrust / lift. Not even my games can go verticall more than 18" without assistance from wings.


So it would definitely be better to clip both wings on the 2 that are still escaping?
This is the exact pic I followed to clip their wings :

700



I have seen other diagrams that clip more feathers or start the top feather at a diff angle. Is this a proper diagram to use?
 
Diagram is good. Problem you can run into is not cutting feathers close enough to their base, hence my request for images of wings you actually clipped. Avoid cutting secondaries as they are also important for protecting body from cold /wet.

Clipping both you will see further reduces their ability to clear fence.
 

New posts New threads Active threads

Back
Top Bottom