Coop almost finished .. a few questions

Yogimama

Chirping
Apr 17, 2022
54
137
96
Central NYS
We’re on the home stretch...
Still need to bury wire, caulk the gaps in the wall boards I feel are too drafty, put linoleum down over the coop floor, and a few other random things. Then nesting box build, ramp etc.

I’ve marked photos with where we’ll cut out a window on the east side (for light), and nesting boxes on door (inside run).

Most of our winter weather (central NYS) comes from south/west, so trying to avoid biggest openings on those sides. Flashing (I think) would be good between top of coop roof and edge of run roof, because there’s only about 6” overhang from run roof.

Question 1 - do window(s) need to be 15”+ above roosting space like ventilation? I would like them to stay open all summer (with an awning or top hinged panel) & plexiglass in winter. Dual purpose - light all year, extra ventilation for summer...(I already have 1 sq ft vent for each bird, not counting this)

Question 2 - is there a standard for slope/angle/length of “awnings” over ventilation/windows? I’d like to angle them really low, but am wondering how low I can go without greatly impacting airflow into coop.

Question 3- do I need to fill in the “humps” in the coop’s metal roofing panels? I’m guessing so (to block access for squirrels, mice etc), so if yes, what do I use?

Thanks!
 

Attachments

  • FBCB5C54-A2DC-4E86-A991-09E00D6D81B9.jpeg
    FBCB5C54-A2DC-4E86-A991-09E00D6D81B9.jpeg
    1 MB · Views: 33
  • 7D401EF1-C44D-4ED7-A2FA-98376D3A713E.jpeg
    7D401EF1-C44D-4ED7-A2FA-98376D3A713E.jpeg
    823.8 KB · Views: 26
  • 3B945122-87B4-4BE5-9308-944F261D9B3E.jpeg
    3B945122-87B4-4BE5-9308-944F261D9B3E.jpeg
    1 MB · Views: 20
  • BDAD3146-47F8-42F1-A760-73C2BA5E4238.jpeg
    BDAD3146-47F8-42F1-A760-73C2BA5E4238.jpeg
    962.2 KB · Views: 26
  • 52ABD997-B424-4504-A06D-188DA44690BF.jpeg
    52ABD997-B424-4504-A06D-188DA44690BF.jpeg
    757.7 KB · Views: 20
Looks good. I'd definitely add a window on the east side. No set angle on the awning, just make sure it's sturdy enough to hold snow if the angle isn't enough for snow to slide off.

As far as covering the corrugated edge of the roofing, I'm also looking for a easy solution as it definitely should be predator proof.
 
Looks good. I'd definitely add a window on the east side. No set angle on the awning, just make sure it's sturdy enough to hold snow if the angle isn't enough for snow to slide off.

As far as covering the corrugated edge of the roofing, I'm also looking for a easy solution as it definitely should be predator proof.
Corrugated edge. Yes...haha my brain just couldn’t think of the right word for it.

Thanks!
 
1. Windows can be at roost height if you want. Especially if it gets hot in the summer, your birds would enjoy a breeze coming through on hotter days.

2. I don't think there's such thing as "too low" on an awning as long as it's still propped open more than just an inch or two. 45 degrees should be fine I would think, maybe 60 if you need more wind protection or to encourage snow to not stick at all.

3. Depending on the roof, they make... uh, not sure as to the technical term, but blocks that are shaped to match the undulations of the roof, so maybe do a search starting with the brand of roof you're using, and look for recommended accessory pieces.
 
I believe you're looking for "Closure Strips." Closure strips gave me many moments of sadness as the same homedepot sold me my roofing sold me closure strips that did not fit the roofing. Check and make sure you have what fits before you buy it. I tried buying 2 or 3 different things at different stores and nothing fit. I gave up and went without.
 
Last edited:

New posts New threads Active threads

Back
Top Bottom