Here is a thread which interested me initially for the build of the coop but then I saw his pvc feeder https://www.backyardchickens.com/t/710785/finished-my-coop-in-three-steps#post_9700747
Not sure why a Y was used cause as far as I can think there would be food sitting in the bottom of the Y forever after. But if a 90deg elbow was used with the same bit cut out of the screw in end cap then I could maybe see that working.
Cheers,
John
Not sure why a Y was used cause as far as I can think there would be food sitting in the bottom of the Y forever after. But if a 90deg elbow was used with the same bit cut out of the screw in end cap then I could maybe see that working.
Cheers,
John