EDUCATIONAL INCUBATION & HATCHING CHAT THREAD, w/ Sally Sunshine Shipped Eggs

If I may, the best method IMHO is to use a butane / propane burner. it burns all the little feathers stucked in the colth and it sanitize EVERYTHING!

Including the wood!!!! Sanitize it right into ash! :lau

Mine are 4x8 in size, I have a door on both ends on opposite corners (kitty corner from each other).

I just reach in and clean them. I use a "shop" dust pan (steel) to clean the bulk of the bedding out. I use a 6 inch putty knife on the small clean up and a whisk broom.

I have 2 gallon garden sprayers I use a bleach mixture in to spray it and let it dry between birds.
Seems to work.

Thanks! Mine are 3x6. I do the regular clearout - will try bleach mixture. 10%?

I'm getting a VEEEEERY late start - I was up early and got the scalder going and the brush cleared/cut near the processing station, and about an hour later realized that the GFCI outlet had tripped and the water wasn't heating. :he So I reset the outlet, plugged it in, and just went back to bed waiting for it to heat. I sorta feel asleep kinda heavy...

Sooooooo... temps are good, having my coffee with a PB&J "breakfast" and about to start. Good thing I had set aside all day for this and didn't plan for anything else.
 
Including the wood!!!! Sanitize it right into ash! :lau

I was thinking the same thing lol

Thanks! Mine are 3x6. I do the regular clearout - will try bleach mixture. 10%?

I'm getting a VEEEEERY late start - I was up early and got the scalder going and the brush cleared/cut near the processing station, and about an hour later realized that the GFCI outlet had tripped and the water wasn't heating. :he So I reset the outlet, plugged it in, and just went back to bed waiting for it to heat. I sorta feel asleep kinda heavy...

Sooooooo... temps are good, having my coffee with a PB&J "breakfast" and about to start. Good thing I had set aside all day for this and didn't plan for anything else.
Always something!
 
Including the wood!!!! Sanitize it right into ash! :lau



Thanks! Mine are 3x6. I do the regular clearout - will try bleach mixture. 10%?

I'm getting a VEEEEERY late start - I was up early and got the scalder going and the brush cleared/cut near the processing station, and about an hour later realized that the GFCI outlet had tripped and the water wasn't heating. :he So I reset the outlet, plugged it in, and just went back to bed waiting for it to heat. I sorta feel asleep kinda heavy...

Sooooooo... temps are good, having my coffee with a PB&J "breakfast" and about to start. Good thing I had set aside all day for this and didn't plan for anything else.

I know as a medical person you will go nuts on this..BUT my measuring system is dump enough in to make e happy. pump it and spray it..


I use 1 ounce to a gallon of water for disinfecting eggs (I actually measure) I use stronger in the pens as I figure it can't hurt to over do it.
 
Including the wood!!!! Sanitize it right into ash! :lau



Thanks! Mine are 3x6. I do the regular clearout - will try bleach mixture. 10%?

I'm getting a VEEEEERY late start - I was up early and got the scalder going and the brush cleared/cut near the processing station, and about an hour later realized that the GFCI outlet had tripped and the water wasn't heating. :he So I reset the outlet, plugged it in, and just went back to bed waiting for it to heat. I sorta feel asleep kinda heavy...

Sooooooo... temps are good, having my coffee with a PB&J "breakfast" and about to start. Good thing I had set aside all day for this and didn't plan for anything else.
You don't have to use it until it gets fire, you just pass jently on the surface, try it and you will see.
 

New posts New threads Active threads

Back
Top Bottom