- Oct 23, 2013
- 36
- 2
- 62
You sir are my hero!!!That is a 30 gallon waterer.
What I did is cut the bottom off a 55 gallon drum. About 4 inches of it.
Then I put a 35 gallon drum inside the 55 gallon drum bottom I cut off.
Then I measured the level the drum bottom comes to on the 35 gallon drum. I then drilled a small hole about an inch below that level.
I put Teflon plumbers tape on the threads of the bung, and screw them tight so no air leaks. As the chicks drink it down the water trickles out.
You know how much water CX's use. This cheap homemade waterer replaces 6 store bought ones.
I have some 55 gallon ones but those I made using "watering cups" BUT NOT BEAKTIME!! They leak and stop working I use the more expensive ones with a spring in them.