Gardening for Old Folks (Adaptative)

[jvls1942]

I really was terrified of those things. We were way out in the country. Our church had an outhouse, and I would have peed my pants before I trapsied out that way by choice!
I was the child who was always in trouble. Every time one rolled inside and down the aisles, I started screaming bloody murder. Then I got taken to the outhouse.

I think somebody had it figured out how to get out of church.

 

[R2elk]

Oops!

 

[Molpet]

Oops!

Hope you have an extra hive set up

 

[R2elk]

Hope you have an extra hive set up

Nope, I had to build a new hive for the ones I got this spring. I did finally remember that I did have the nuc that I got bees in this spring. I only had one deep frame so I used medium frames for the other four frames.

They are currently in the nuc for now.

 

[bruceha2000]

I was the child who was always in trouble. Every time one rolled inside and down the aisles, I started screaming bloody murder.

Were those in charge of the church not bright enough to CLOSE THE DOORS?!

 

[janiedoe]

Were those in charge of the church not bright enough to CLOSE THE DOORS?!

No air conditioning Bruce! We had those little cardboard fans on a stick.

 

[bruceha2000]

Better than a tumbleweed blowing past your face!

 

[jvls1942]

I finally met a tire that I can't change. It is off of a garden cart my DD just gave to me.
It must be some sort of industrial rim. I have to split the rim to get the tire off. twelve bolts. six 9/16" and six 7/16" . of course they have not been taken off in about thirty years.
the small bolts hold the hub to the rim. I suspect the hub size can be selected, same as you can do with gear and pulley hubs.
I wasted way too much time with it. I will go back at it on some rainy day in the future.

 

[bruceha2000]

PB Blaster is your BFF when it comes to getting stuff unstuck.

 

[cavemanrich]

PB Blaster is your BFF when it comes to getting stuff unstuck.

No idea what that is Is PB for peanut butter???

I have heard Coca Cola used to free up rusted things,,, but never tried it.
I usually just break off old bolts, and replace all with new ones. Sometimes it gets complicated when bolts are studs in a housing.