That is certainly an "off label" use for it! Not sure how you get the foam to uniformly spread through the tube.I squirted Great Stuff into the valve stem of the inner tube.
I assume you tried something like "Slime" but it didn't work?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That is certainly an "off label" use for it! Not sure how you get the foam to uniformly spread through the tube.I squirted Great Stuff into the valve stem of the inner tube.
No S***t .FINALLY!!!!!!!
Too many people don't know that there are different expansion grades of the foam. They market a low expansion foam for around doors and windows.I was laughing before I got to the punch line. I knew what was coming.
I have seen guys foam around door jambs and window frames, and then not be able to open them.
same here, I don't pump all the foam in at one time, either.Too many people don't know that there are different expansion grades of the foam. They market a low expansion foam for around doors and windows.
Personally, I don't put the trim on until after the foam is dry and cut off any excess.
The foam is a fantastic glue.same here, I don't pump all the foam in at one time, either.
when i installed the direct set windows in my sunporch, I just foamed all twelve of them in with foam, didn't use any fasteners.
they are still in after 30 years..
Yeah, especially on your fingers.The foam is a fantastic glue.
Wouldn't know about that. I don't stick my fingers in it.Yeah, especially on your fingers.
Try it, you'll like it.Wouldn't know about that. I don't stick my fingers in it.