grannys gone and done it

Status
Not open for further replies.
the yaks do not like the noise or sound of henry LOL they were all up by the feeder until gene came around in Henry to make sure everything was running and working right. New Carb and exhaust only no muffler. The yaks all hikes their tails straight up and ran down to the other end of the tit.
 
Twist, I have added 220 breakers to my switch box before . the wiring is heavy duty.. so yes I ran new wire as well to the plug box.
 
caught up Only saw 1 buck today and man was he a nice one.... We got henry running for now they (rod and Robert) have a tractor they are allowed to use. I tired to ge thte electric working for the tank heater. FARKING electrician. did not hook the old fuse box to the new power box or even just pull the wires over. So now I will have to turn the old fuse box into a glorified junction box and string wire to the breaker box/new power supply but FIRST I also have to get breakers. And to top it all off only gave me a 100 amp service. any one know can I just change out the 100 amp breaker for a 200 or will I melt the power supply wires. So I am puttering back and forth between the inside of the barn and the outside where the new box is all of the sudden I turn around and the yaks had come up to visit me. BRB desk
Extremely dangerous! do not do it. Why don't you just have them pull 200 amp from the pole?
 
The yaks do NOT like old bread as a treat.  LOL  either old white or old green.    11 1/2 dozen eggs since sat  at about 3 pm today. 

So my cc guy emailed me this am (coward didn't not dare call me)  my new POS machine is still where is was last weds.  When he promised me I would have it last thrus or Friday.   IT had better show up tomorrow or I am going to show and help him put it somewhere I promise you he won't like  and sideways to boot.   :he
That is crazy twist, so sorry that your working with imbasils. Why is it that nobody seems to have ethics anymore? You used to be able to hire a person on nothing more than a handshake & they would do a wonderful job. Now-a-days you need to have a contract to have someone do a job because 8/10 times your going to have to take them to court to either get them to finish the job or that they've done such a shoddy job you need to get your money back. So what is the cc guys excuse for the machine being in the same place it was a week ago?
 
Status
Not open for further replies.

New posts New threads Active threads

Back
Top Bottom