grannys gone and done it

[Granny Hatchet]

I have wafer thermostats 2 of them . I never could get the setting right with them both so ended up only using one. they are both new.

 

[Granny Hatchet]

The freezer space sounds like it would be perfect for the fans and heat source. Take the door off the freezer part letting it be open into the fridge part. Your humidity pans can go at the very bottom of the fridge and 2 turners in between. Any thoughts on the type of thermostat you want to use?

so the heat will blow towards the door and not down ?

 

[canadachickens]

The freezer space sounds like it would be perfect for the fans and heat source. Take the door off the freezer part letting it be open into the fridge part. Your humidity pans can go at the very bottom of the fridge and 2 turners in between. Any thoughts on the type of thermostat you want to use?

I agree with fire. Freezer area would isolate heat source and give more consistent temp through out cabinet

My tablet is just about dead. I will recharge and sleep and on the issue and hopefully have some sketches of my ideas in the morning. Good night all.

 

[fire370]

I'll try to get what I'm thinking drawn up and post a pic or two. You may be better off using a couple light bulbs for heat or a fan/heat combo unit from incubator warehouse.

 

[Granny Hatchet]

Thank you fire, I am doing this on a shoe string.

 

[Granny Hatchet]

I agree with fire. Freezer area would isolate heat source and give more consistent temp through out cabinet

My tablet is just about dead. I will recharge and sleep and on the issue and hopefully have some sketches of my ideas in the morning. Good night all.

night, thank you.

 

[fire370]

so the heat will blow towards the door and not down ?

That is correct. It'll force the air out and down then pull it back to the top. Just think of it as drawing a circle with the airflow.

 

[Sally Sunshine]

Thanks cc

and fire and K

 

[Granny Hatchet]

where does the fresh air come in ? would it be the 4 holes recommended to drill in the top and bottom sides ?

 

[Granny Hatchet]

Thanks cc

and fire and K

and Sally. I missed one person. I am sorry.