hardware cloth skirt

[achake01]

Hi again...
Here are some pictures. My boo-boo from last weekend was skirting the mesh from out-to-in (it's underneath the stone walls and gravel). This coming weekend, i'm going to reverse the skirt from out-to-in. I don't have to remove the under-the-stones/gravel skirt, do i (which would mean completely removing the stone wall)? I can simply cut the hardware cloth out and replace at the correct outward angle? I would imagine having skirts in both directions wouldnt be a bad thing. Thoughts?

https://www.backyardchickens.com/forum/uploads/51209_chicken_coop_005.jpg

https://www.backyardchickens.com/forum/uploads/51209_chicken_coop_001.jpg

https://www.backyardchickens.com/forum/uploads/51209_chicken_coop_004.jpg

https://www.backyardchickens.com/forum/uploads/51209_chicken_coop_003.jpg

https://www.backyardchickens.com/forum/uploads/51209_chicken_coop_002.jpg

 

[achake01]

sorry, i meant this weekend i'm going to reverse the skirt to go outward

 

[gryeyes]

Nah, if you've got the hardware cloth to do it, just add it on the outside.

NICE looking coop and run! VERY nice!

 

[achake01]

Thank you! It's a work in progress; I will post pix when I'm done. It's a garden shed and I've segmented off the back portion as the coop. It's a small property in a quasi-urban suburb, but I want the coop and run to be an integral part of the entire garden. I'm hoping it will be beautiful.

 

[CoyoteMagic]

Just add some to the outside and cover it with either rock or mulch. I wouldn't go about digging it up and cutting it off. Too much work.

Love the rock wall!