Harris Farms Nurture Right 360 Incubator is AMAZING!

[Pullety]

What would you do??

I know what you’d do! You’d put them in another incubator! I wish I had that option right now.

 

[Pullety]

How low is the temperature? Have you tried moving the thermometer to a different spot in the incubator?

97.9 right now. I did move it and it came up 0.4 degrees

 

[CluckNDoodle]

I know what you’d do! You’d put them in another incubator! I wish I had that option right now.

Actually, I would put five more thermometers in there first to see if my thermometer died but I don't expect anyone else to have a massive collection of thermometers like me.

 

[Pullety]

97.9 right now. I did move it and it came up 0.4 degrees

Maybe I’ll try moving it right below the incubator thermometer

 

[Pullety]

Actually, I would put five more thermometers in there first to see if my thermometer died but I don't expect anyone else to have a massive collection of thermometers like me.

I have more but not all calibrated. One is and, when I took the secondary thermometer out and put them next to each other, they were the same.

 

[CluckNDoodle]

97.9 right now. I did move it and it came up 0.4 degrees

I think I would leave it. Take the thermometer out and calibrate it again. To give you peace of mind, some people swear by lowering the temperature to 98.5 for hatch. I've never done this in the NR360s mind you, but when I use my IncuView as a hatcher there's always a hot corner and a cold corner and I'm comfortable leaving it at 98F. Everything still hatches normally.

 

[CluckNDoodle]

I have more but not all calibrated. One is and, when I took the secondary thermometer out and put them next to each other, they were the same.

This is very unusual but I can't see a reason the little cages would effect the temperature...

 

[Pullety]

I think I would leave it. Take the thermometer out and calibrate it again. To give you peace of mind, some people swear by lowering the temperature to 98.5 for hatch. I've never done this in the NR360s mind you, but when I use my IncuView as a hatcher there's always a hot corner and a cold corner and I'm comfortable leaving it at 98F. Everything still hatches normally.

Thanks for the reassurance I appreciate it!

 

[Pullety]

How far down is the NR360 thermometer supposed to go?

 

[Pullety]

You know what, I’m taking out all the thermometers; they’re making me crazy. A baking thermometer read 102. The NR thermometer was a bit curled up so maybe it was taking the reading too high up (then adjusting the temp accordingly). I’ve made it straight again. So 24 hours at 2 degrees too low, if my guess about the curled thermometer is right.