Good Morning! I'm having a small issue with coming up with a design for how to work the ventilation at the top of the front of the coop. We have boo-coo's (if that's a word) of ventilation at the top and sides of the coop, but I'm having a hard time with getting the front buttoned up. Who knew something this small would hang up the whole process of finishing this thing up! Top left of the picture is what I'm thinking will work. I mocked up a 1x4 and drilled 1/2" holes across, here's the questions....
1. Do i need to cover these holes with wire? (holes are 1/2" in diameter-hardware cloth is 1/2" openings as well).
2. Do i even need to put ventilation in this spot with how much the rest of the coop has? (pictures of all that too). If i can box this in and still be OK it would save me so much time.
3. The top ventilation is about 6" with a removable board to add another 6" if needed during the hot, humid summer Virginia months. With the current opening of 6", i know there cannot be too much, however, I'm worried about the Winter and frostbite issues. Should i close the gap in more now?
Thanks in advance for the help! Namaste!
1. Do i need to cover these holes with wire? (holes are 1/2" in diameter-hardware cloth is 1/2" openings as well).
2. Do i even need to put ventilation in this spot with how much the rest of the coop has? (pictures of all that too). If i can box this in and still be OK it would save me so much time.
3. The top ventilation is about 6" with a removable board to add another 6" if needed during the hot, humid summer Virginia months. With the current opening of 6", i know there cannot be too much, however, I'm worried about the Winter and frostbite issues. Should i close the gap in more now?
Thanks in advance for the help! Namaste!
