HHD automatic incubator, HELP!!!

[Majak5]

No matter what temp I set it too it gets hotter in the baton than what I set it to and the alarm says it’s too hot and it beeps, I also don’t know how to calibrate it

 

[oregonkat]

I am wondering if perhaps you've got a bum controller Where did you get your bator from? Can you take it back and get another, perhaps a different brand?

 

[Kiki]

No matter what temp I set it too it gets hotter in the baton than what I set it to and the alarm says it’s too hot and it beeps, I also don’t know how to calibrate it

If you set the bator temp to say 90 it might get to the "correct" temp.
But you won't know unless you have a known working thermometer inside the bator to compare it too.
Testing/calibrating incubator thermometers.

 

[Dmitrys]

I got an HHD automatic incubator and I don’t know how to get the automatic turner to turn on it’s own, it only turns when I press the reset button

The turner turns on 1 time per 2 hours. Doesn't it?

 

[lawson1986]

The auto turners usually only turn every hour, so when you press reset, you see it turn, then it should count down and then at one hour it should turn in the opposite direction. For the beeping, it could be the temp is off, or the humidity. Mine beeps when the humidity goes under 45% (its super annoying!)

 

[Majak5]

Hi

The auto turners usually only turn every hour, so when you press reset, you see it turn, then it should count down and then at one hour it should turn in the opposite direction. For the beeping, it could be the temp is off, or the humidity. Mine beeps when the humidity goes under 45% (its super annoying!)

it doesn’t count down, I don’t know how to set it to make it count down and turn on it’s own

 

[Majak5]

The auto turners usually only turn every hour, so when you press reset, you see it turn, then it should count down and then at one hour it should turn in the opposite direction. For the beeping, it could be the temp is off, or the humidity. Mine beeps when the humidity goes under 45% (its super annoying!)

It’s also quite annoying as I am incubating quail eggs and they don’t fit in the egg trays properly

 

[Lazy Farmer]

I have no advice on the turner but I would like to recommend that you buy a couple other thermometers and calibrate them.
Do not trust the thermometer on the bator.

X-me-2

 

[Kiki]

It’s also quite annoying as I am incubating quail eggs and they don’t fit in the egg trays properly

Someone recently mentioned putting a piece of gauze under the egg in the Turner to help hold it in.

 

[Majak5]

Someone recently mentioned putting a piece of guaze under the egg in the Turner to help hold it in.

Someone recently mentioned putting a piece of guaze under the egg in the Turner to help hold it in.

Gauze? How?