HHD

Ron Davis

Hatching
Joined
Jan 29, 2019
Messages
1
Reaction score
0
Points
2
I have a 48 egg HHD incubator it will not set it just goes back to EE I tried to get the warranty that I bought when I got it on ebay it came from china and seller would not take it back and warranty would not cover it because I made the mistake of telling them I was a teacher and that disqualified the warrant as it is commercial they say. Any suggestions
 
Hello,

I purchased an HHD incubator and just hatched out my first batch of baby chicks. The 2 fans in the incubator are covered with white plastic slats. It is best practice to keep chicks in the incubator until they are dry before moving them to the brooder. 2 of my baby chicks put their beaks easily into the fan (the slats are way too far apart to keep the little babies safe). THE FANS CHOPPED THE ENDS OF THEIR BEAKS OFF!!!!! The little injured chicks bled all over the incubator and I had to remove all the chicks right after they were born and blow their little wet bodies dry by hand with a hair dryer, as the humidity was far too high.
 
Hello,

I purchased an HHD incubator and just hatched out my first batch of baby chicks. The 2 fans in the incubator are covered with white plastic slats. It is best practice to keep chicks in the incubator until they are dry before moving them to the brooder. 2 of my baby chicks put their beaks easily into the fan (the slats are way too far apart to keep the little babies safe). THE FANS CHOPPED THE ENDS OF THEIR BEAKS OFF!!!!! The little injured chicks bled all over the incubator and I had to remove all the chicks right after they were born and blow their little wet bodies dry by hand with a hair dryer, as the humidity was far too high.
Since you know the problem,,,,,, do you think you can cover dangerous area with some window screen fabric?
Next time all will be safe:highfive:

BTW WELCOME TO BYC,,,,,,,,,,,,,,,,,,,,,,,,,,,,, :welcome
 

New posts New threads Active threads

Back
Top Bottom