Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thats a common misconception.I thought it shrank when it was cold.![]()
You got it! You want the fans to spin constantly but the heating elements (bulbs) should turn on and off based on what your stc-1000 wants them to do. Make sure the fan blows across the probe sensor for the controller also. It will decrease the amount of down time. The closer the probe is to the heat source the faster the controller will turn off, decreasing the amount of on time. Really it takes experimentation to find out what works best in the container you have.So is this how things get wired?
Two fans get wired separetely to a power adapter and plugged into a direct power source.
STC-1000 get's wired up with the heat source (two lights) and a plug to be able to plug it into a direct power source.
This way fans are always on and thermostat can control the amount of heat. Correct?
Stop lying to yourself BUBBLES
Thanks again.You got it! You want the fans to spin constantly but the heating elements (bulbs) should turn on and off based on what your stc-1000 wants them to do. Make sure the fan blows across the probe sensor for the controller also. It will decrease the amount of down time. The closer the probe is to the heat source the faster the controller will turn off, decreasing the amount of on time. Really it takes experimentation to find out what works best in the container you have.
Quote: I can handle that.
Quote: It has been a while. I forget these things.