Incubator not heating up any more!!!

[jvls1942]

if the thermostat is removable, it can be replaced
there most likely is a part number on it somewhere.. do a search with that part number .

 

[cmom]

I use a cigar hygrometer and when I tested it it was right on.

 

[cmom]

I also have a Farm Innovators hygrometer but the lowest it goes is 30%. My cigar one goes from 0 to 100% Usually they both read the same or very close. Different spots in the incubator may be slightly different in the readings.

 

[jessfarm]

if the thermostat is removable, it can be replaced
there most likely is a part number on it somewhere.. do a search with that part number .

it can be removed but I looked every where on it and there isn't a part number. its the only part that doesn't have a number which sucks. I tried a new heater/fan and let it run for 24 hrs but it never got to 80 degrees. its the thermostat for sure but I had to buy a whole new unit. I guess i'll keep the old one for spare parts .

 

[cmom]

it can be removed but I looked every where on it and there isn't a part number. its the only part that doesn't have a number which sucks. I tried a new heater/fan and let it run for 24 hrs but it never got to 80 degrees. its the thermostat for sure but I had to buy a whole new unit. I guess i'll keep the old one for spare parts .

Can you post a picture of the thermostat?

 

[jessfarm]

Can you post a picture of the thermostat?

Farms innovator 4250

 

[007Sean]

Instead of the thermostat, you might check the thermistor. That's the temperature probe. If it's not working properly, broken wire, or touching something it shouldn't, it won't let the thermostat turn on and go off like it should.

 

[jessfarm]

Instead of the thermostat, you might check the thermistor. That's the temperature probe. If it's not working properly, broken wire, or touching something it shouldn't, it won't let the thermostat turn on and go off like it should.

its definitely not broken and or touching anything and I re-set all the connections after I had moved it to a different wall outlet. ive had it on with eggs in it and empty and it wont heat up regardless

 

[cmom]

I went back through and saw the pictures you posted.
https://www.meyerhatchery.com/productinfo.a5w?prodID=3150

 

[jessfarm]

I went back through and saw the pictures you posted.
https://www.meyerhatchery.com/productinfo.a5w?prodID=3150

it pretty frustrating that there isn't a part number for that piece... I guess that's how they make their money. right now I have my pak lay hmong eggs in a new 4250 and she's humming along