We recently bought a cabinet type incubator. An older one, red in color, wooden, holds about 300 eggs, has three levels to put eggs on, auto turner and such. No instruction booklet....that's the problem. When we first plugged it in, it was at a perfect 99.5 degrees. Well, one of the cats, I believe, has played with the metal controls on the outside and messed it up. If you are standing in front of it, there are two small metal 'levers' to the right and on the left towards the back is the switch for the auto turner. Of these two switches on the right side, I do not know how to make the temp to up/down. It is hovering around 101-103 and I'm afraid it's killed the chicks that are developing. (call duck eggs are in there). I would GREATLY appreciate anyone's help on this....please. Is there a way to move the trays to a level state without having to stand there and wait for it to start a turn cycle and then turn it off? Also, we are having a terrible time keeping the humidity up. I've got 4 trays of water in there and it's only around 35-39%. Thanks a bunch.