just finished my drapery (ebay) motor auto door, works great, everything else came from homedepot, the 1/2 inch channel, the digital timer, the eye hook to off set the counter weight, a small peice of 3/8 plywood(2 foot by 4 foot, cut down to 18 inch X 4 foot), 3/8 counter sink screws, 1/16 green coated steel cable, for the counter weight I drilled a set of holes in a 5/8 inch rod coupling and put a 5/8 X 6 bolt in the bottom, tied the cable thought the drilled holes, oh for the door I went with the poly cutting board idea, again I drilled holes right threw the handle for the cable, I'm in the $140 to $150 range, thanks for all the good ideas!
PS I think the cable was 1/16, it was the thinnest coated cable they had.
later,
putty
PS I think the cable was 1/16, it was the thinnest coated cable they had.
later,
putty