We are hatching silkies sizzles and 1 sultan in a farm innovators 4400 incubator. We're in NY with very dry indoor conditions, but maintaining the incubator at about 55 %humidity and temp 98F to 99F, dropped it 1/2 degree on about day 19. Today is day 20, we have chirps and 1 pipping through the shell, a sizzle. My concern with raising the humidity was that about 1/2 of the air sacks weren't too large and I wanted to give these ones a shot at hatching too, didn't want to drown them. At this point humidity is at about 55 % with the 1 pipping. Is this ok? I read that silkies may need less humidity that LF somewhere. It's our first hatch. Humidity drops about 5 % in the incubator in about 5 hours. To add warm water I've been removing the red ventilation plugs and adding it to the center area with a straw. Do you recommend increasing the humidity? If so, when how many have pipped? These were shipped eggs, they came from 1100 miles away and the oldest egg was 9 days old by the time we got it. That's the sultan egg and it looked great on day 18. The post office did an excellent job getting these eggs to us! Our local postman is experienced with egg incubation so he's been kind to give advice! Ohhh sooo nervous! Can't wait to see what they look like. They are chirping inside the shells. I hope that some make it out ok. Any advice is greatly welcomed!
Good luck with your hatches. If we get anything, will post a pic!
Good luck with your hatches. If we get anything, will post a pic!