I would avoid bleach and such products, it's very corrosive to metals especially, dries out plastics, ect... I use white vinegar and water, a 1 part vinegar to 8 parts water. Remove any parts that easily come out of the machine and spray with my vinegar solution well on everything inside the machine, drench it down. Let it sit about 10 or so mins, then rinse it down with water. Don't immerse the machine in water however. I use dish soap on the parts I can remove. Let everything completely dry before reassembling or using.What do you all do for incubator sanitisation? I've been meaning to tackle sanitising the incubator, since I'm pretty sure what I did do was less than adequate