- Thread starter
- #81
Mcbeers, I have several pvc feeders that after much trial and error finally work great. I used 3" PVC 1- 36", 1- 8", 1- cap 1- 90 el, 1-3" inspection cap. I marked the center line of the 8" pipe and drilled 2- 1 1/2 dia holes so that the edge of holes are 1" from ends of pipe. Cut out the material between holes. Install inspection cap and elbow making sure to align el with centerline. Install 36" pipe sand the top of pipe to reduce diameter so that cap will come off easily.