Show me your quail pens!!!

Pics
These guys have the best pen set up i have seen for growing out
http://www.quailranch-ok.com/flight_pen_design.html

it's a bit large for the hobby producer but you could always scale down


At one time i had online plans for a breeder pen where the eggs rolled out on a sloped wire mesh floor 4 feet deep. I think i could make something like that that would work well for egg gathering.

http://www.quailranch-ok.com/water_system.html

is really quite amazing to me and if i ever get very big i would have to try this water system out.


Did something similar to these...mine are on the ground though...used black poly pipe and just slipped it over T-posts to make the bows.


400


400
 
Last edited:
I will be receiving 12 + "extras", fertile Gambel Quail eggs the 11th - 13th. I only need 7 of them. If anyone has an incubator and would like to hatch some of these beautiful birds please let me know. Otherwise the extra eggs will go to waste. I am in Las Vegas, NV so if you do not live close we would just need to arrange shipping.
 
I will be receiving 12 + "extras", fertile Gambel Quail eggs the 11th - 13th. I only need 7 of them. If anyone has an incubator and would like to hatch some of these beautiful birds please let me know. Otherwise the extra eggs will go to waste. I am in Las Vegas, NV so if you do not live close we would just need to arrange shipping.

if only i had room in the incubator
barnie.gif
 
I will be receiving 12 + "extras", fertile Gambel Quail eggs the 11th - 13th. I only need 7 of them. If anyone has an incubator and would like to hatch some of these beautiful birds please let me know. Otherwise the extra eggs will go to waste. I am in Las Vegas, NV so if you do not live close we would just need to arrange shipping.
why do you only need 7? Does your bator only hold 7? If you only want 7 birds, I would throw all 12+ in the bator and pray for 7 to hatch.....gambel arent the easiest to hatch, let alone being shipped...
 
Almost finished. Today I bought the PVC to mock up the watering system. I need to throw some plywood on top but I can't fit it in my car! I'll have to get someone at Home Depot to cut it into small pieces for me. I hope to have it finished by the end of the week.

 

New posts New threads Active threads

Back
Top Bottom