So built the new coop

[Elkhounds]

After returning the Formex chicken coop we ordered I got the plans for one to build. I modified them some and below is the finished (mostly) coop. It is 5x4 with a 4x4 inside not counting the nesting boxes.

I do have a question about the roosting bar. How high above the floor of the coop should the bar be? I will be using the deep litter method in this. Also I plan on using a 2x4 or 2x2 for the bar. I have heard to NOT use a round clothes rod. Which would be better? I have both. I still have the Omlet auto door to install. That is what is sitting inside right now.

Anyway I did have a lot of fun building this. I think it turned out great and matches with the house well. We have 5 chicks that are now about 4 weeks old and I hope to move them out when the weather gets warmer in 3 weeks or so. I plan on having a run built for them attached to this by then. It will be about 40 sq/ft plus I have the 20 sq/ft under the coop.

I do know that 16 sq/ft (not counting nesting boxes) is not the 4 sq/ft recommended. We are only allowed 4 birds total and if it does get to crowded I will take one to my sons farm and keep just the 4. We got 5 incase one of them didn't make it but all are doing great.

Thanks for all the help.

 

[mowin]

Looks good. Pic's don't show, are the soffits open for ventilation?

 

[Elkhounds]

Thanks. Yes they are open on top and bottom. I do have to install some screen on them yet but they will not currently have any covers. From what I know (very little) I will need them open even in the cold winter months to let moisture out. Not sure how they do that in the few times we get to the -20 to -25 nights but I guess they can do it.

 

[mowin]

Yes they are open on top and bottom. I do have to install some screen on them yet but they will not currently have any covers. From what I know (very little) I will need them open even in the cold winter months to let moisture out. Not sure how they do that in the few times we get to the -20 to -25 nights but I guess they can do it.

Use 1/2"x1/2" hardware cloth for the ventilation. Chicken wire or screen material is not predator proof. Make sure your roosts are set so the ventilation is above the birds heads when on roost. On the really cold windy nights, you can use furnace filters over the ventilation to lessen the chance of drafts.

 

[Elkhounds]

Use 1/2"x1/2" hardware cloth for the ventilation. Chicken wire or screen material is not predator proof. Make sure your roosts are set so the ventilation is above the birds heads when on roost. On the really cold windy nights, you can use furnace filters over the ventilation to lessen the chance of drafts.

Thank you. I have 1/2x1/2 under the coop and will be using it for the run as well. I do have some 1/4x1/4 I was going to use for the ventilation covering.

I think I have some old (unused) filters so I'll have to set those up to use. Great idea.

I was planning on trying to keep the roost bars low so like you said. Just don't know if there is a "minimum" distance up from the bottom that they should be. I can't got 3 feet or anything like that but I can do 16-20 inches.

 

[Auntiejessi3]

Thank you. I have 1/2x1/2 under the coop and will be using it for the run as well. I do have some 1/4x1/4 I was going to use for the ventilation covering.

I think I have some old (unused) filters so I'll have to set those up to use. Great idea.

I was planning on trying to keep the roost bars low so like you said. Just don't know if there is a "minimum" distance up from the bottom that they should be. I can't got 3 feet or anything like that but I can do 16-20 inches.

Just make sure they are above the nest boxes. Good job! Very nice coop you have there!

 

[mowin]

Thank you. I have 1/2x1/2 under the coop and will be using it for the run as well. I do have some 1/4x1/4 I was going to use for the ventilation covering.

I think I have some old (unused) filters so I'll have to set those up to use. Great idea.

I was planning on trying to keep the roost bars low so like you said. Just don't know if there is a "minimum" distance up from the bottom that they should be. I can't got 3 feet or anything like that but I can do 16-20 inches.

You want your roost to be higher than the nest boxes. If not, the gals will sleep in them. No standard hight for the roost bar.

You can use the 1/4" HC for the ventilation, but just be aware that it's a thinner gage then the 1/2". Use screws and fender washers to fasten it to the coop.

 

[Krugerrand]

I like your coop. It looks a lot like what I have.

I have an inch or so of sweet PDZ in the bottom and do the daily scooping thing.

This article has some great information on roost height and is worth checking out.
https://www.backyardchickens.com/articles/yakisugi-coop.76398/

the rule of thumb on this website that coops should be a minimum of 3.5' high on their shortest side, a height that allows for a roost height of ~20'' and ventilation above the chickens’ heads.

 

[rosemarythyme]

I'd put roosts just above nest box height since there's not a lot of room for landing, so that'll make it easier on the birds.

Deep litter or deep bedding? Don't plan on doing deep litter in a small coop with a wood floor. Deep litter favors some moisture and exposure to microbes in the soil, in order to compost down poop. Moisture is the opposite of what you want in most coops.

 

[Krugerrand]

I went right above the nest boxes.

View attachment 2896415
View attachment 2896416