Still air/Styrofoam incubator question/lockdown

Yeah. I only hatch 12 at a time. I usually get 10/12 hatch rate. I have also never lost a chick, even in the brooder. They are pretty strong little things.
Also i use a small automatic incubator with fan and Turner and stuff, so maybe the settings are different for Styrofoam incubators.
 
Most recommendations are to check the temperature at the TOP of the eggs. I think your temp is ok for a still air. I always have my humidity between 55 to 65 for hatching. I agree that they are pretty tuff little things and conditions aren't always perfect but they hatch anyway when the time comes. ;)
 
It sounds like your issue is that you are taking the temperature at different elevations in a still air incubator. Warm air rises so where vertically you take the temperature is important.
I don't now where that thermometer was in relation to the eggs during incubation. If it was on top of the eggs and it stayed about 101.3 F you were about perfect as long as you can trust that thermometer.

If the eggs and that thermometer are all laying on the floor of the incubator 98.5 F should be good enough. Provided you can trust the thermometers.
 
I always have my humidity between 55 to 65 for hatching.
I am gonna lower mine for this batch i have in now. They are at day 3 and i will keep it at 45-50% and not increase until day 20 to only 55-65%. I always thought at 70% or higher its gotta be like the tropics and hard to breathe 😅. Plus the humity always goes up on its own when they start hatching and they are all wet. I got the 70% from the instructions on my bator, and usually get an 80% hatch rate ( only doing 12 at a time tho). We shall see if it makes a difference. Thanks for the info!

Also looking forward to seeing pics of these babies :)
 
Sorry it's a little large but I have 2 eggs with this now...I'm about as excited as a kid at Christmas.

151577923_266304168429862_2650933652161774138_n.jpg
 
hello people, I see you are comparing apples to bananas.
That is a bad practice.
You cannot copy what someone does in a still air incubator in a forced air incubator. We all do different things and have worked out what works for us personally. Forced air incubators will dry eggs more than a still air incubator so 45% in still air is fine, worked for me in the past but I would never use that in a forced air. 60% has been fine during ockdown but I wouldn't risk lower.
 

New posts New threads Active threads

Back
Top Bottom