Trouble with my nurture Right 360

[CluckNDoodle]

@CluckNDoodle has a lot of experience with this incubator.

Also, consider contacting Manna Pro at the email address listed at the end of the manual.

Like any electrical appliance, things can happen with wiring. Have you looked over every part of the cord to make sure the insulation is intact and there are no kinks in it?
Have you tried it with a different outlet / do other appliances work fine on that electrical outlet?

You can contact Manna Pro for their take on the situation but they didn't help me when it was the fan. It never hurts to try though!

It's heating up but the fan isn't working, right? It sounds to me like the fan, the wiring to the fan came loose, or something on the electric board got messed up.

I say this because mine did the same when I dropped one of my incubators and there was damage to the fan. The incubator was still heating, and the digital components were all working but the fan was "haywire" so the incubator would overheat and the alarm would start going off.

I couldn't readily find replacement parts for the incubator anywhere but eBay but this was quite some time ago so that may have changed.

If you know anyone really handy with electronics it could be something as simple as soldering coming loose on the board. I AM NOT ONE OF THOSE PEOPLE. My Dad is SUPER handy with tiny computer bits and soldering but I did not inherit that gene, lol.
Alternatively, if you know someone moderately good with electronics, you can just order a replacement fan (I can't remember if they came with the wiring harness).

 

[JocelynHernandez22]

Im having the same issue did your get resolved?

 

[PinkSif]

Having the same problem

 

[erkme73]

Having the same problem

Same here

 

[Bbruning]

Hello, I have had great success using my Nurture Right 360. Had it set up for my 5 time . I did not have the eggs in yet. I just went to turn it on and it will not stop blinking, flashing and beep beep beeping over and over nonstop.The fan slows down then goes back to normal. I have unplugged it took it apart blew on all the moving parts and plugs to get dust out, I have tried a different plugin. All I can think of to do has been done. None of the buttons work. It just flashes and beeps immediately when it gets plugged I. Does anyone ever had the problem? I have looked online and cannot find any help

I am glad to see I found someone with the same problem. I have used mine twice and when I went to set it up for new eggs it did this exact thing. Pulsing fan and blinking on and off. I think it’s a wire issue but I don’t visually see any problems and I’ve found in and made sure everything was in all the way. Keeps blinking :/. Did you ever solve it or just buy a new one?