URGENT NEED HELP

[Duck_Lover123]

I have my Amazon incubator and am hatching 12 bantam eggs. I am having trouble controlling the temperature. My incubator says the temperature is 100.4, my govee smart WiFi thermometer/hygrometer says 97.5 and my ink bird thermostat (I am just using the temp reads) says 98.6. Both the govee and the ink bird are on the edge but I still need to know the actual egg temp in the middle. I have photos attached, the shiny/white probe is my inkbird, the white box is my govee and the black is my incubators. I have the hethya pro 16 egg incubator with auto turning but is an old version which does not support water tray system. I need help the eggs are day 1. I have a blanket over it normally. UPDATE: I tilted my govee so the sensor faces closer to the egg level but temp is still reading pretty low around 98. I have a photo attached.

 

[Susan Skylark]

Ignore the incubator temp, keep the thermometers around 99-100ish, that gives you a degree on either side of safe flux so if one or the other is a little off it won’t wreck your hatch.