What do I have ??

[ga_goat]

I recently got an old cabinet incubator it is made of plywood ½ inch with a 1x3 board going all the way around it at both ends
the latches are common window locks , 2 hinges . inside there are 2 tipping trays operated by a hand crank on top .
there is a 6 inch round tunnel at the top with a fan pushing air through and the nichrome wire heating element criss crossing in front of the tunnel ,,, I am trying to find an auto turner for it and suddenly found out that I don't know what i've got or what will fit .
and one other thing a solid plywood door with the theromostat mounted in the center of the door ans 2 places on the right side
for theromoters , 1 is there ,not working, and the front one is missing the glass bulb both have a metal tube that sticke into the inside about 6 to 8 inches .
If you know what it is or who made it please let me know

 

[ga_goat]

bump

 

[Ga.chickenman]

Sound a lot like the one I'm using,take a look at my page let me know if yours looks like this??mine is a older sportsman.. google this and you can adapt a auto to yours???

 

[ga_goat]

looks just like it except the placement of theromostat and mine is only 2 tray , it has a 3rd tray but it just sets on the bottom as a hatching tray ,
I think I've found a way to use mine like it is , I put ( tightened up the chuck ) a battery powered drill to part of the bolt that holds the handel and can turn the trays with just a trigger pull . ,,, one day i'm going to figure out haw to post a pitcure .