I don't remember if I posted my candling results from last night. All of the eggs looked to be fertile, no clears at all! we were concerned that the dozen eggs from my son in law might not be fertile, but they all were. Two blood rings though so those got tossed. The green eggs are exceptionally difficult to see through, I could see the air cells and that was it, so I'm going to say they are fertile as well. First batch I've set that at least two of the AM eggs weren't fertile, so out of 28 eggs, so far 26 of them look to be fertile and coming along nicely.
I'm keeping the WCB set at 100, it goes to there, turns off the heater, but the temp sensor will show it go on to 101, then it starts cooling off and when it gets back to 99, it kicks it back on again. I may have to add another fan, because there is at least a one degree difference from top to bottom for each shelf. I've moved the sensor probe to different levels, and this seems to be the best consistancy with it looped and wrapped from the middle of the first hatching tray shelf. I am thinking another fan might help move the warm air around just a bit better. The humidity is staying right around the 30% mark for now, I know I can bump it into the 57-60% range with the other water pan on the top shelf, so I'll do that on lock down day and slowly uncover the pan to expose more water surface over the course of day 18 and 19....
I am not just hoping for, but expecting a much better hatch rate this go round. I just set 14 more AM eggs wednesday, so for the first time I actually had the 42 egg turner full for a couple days.
I'm keeping the WCB set at 100, it goes to there, turns off the heater, but the temp sensor will show it go on to 101, then it starts cooling off and when it gets back to 99, it kicks it back on again. I may have to add another fan, because there is at least a one degree difference from top to bottom for each shelf. I've moved the sensor probe to different levels, and this seems to be the best consistancy with it looped and wrapped from the middle of the first hatching tray shelf. I am thinking another fan might help move the warm air around just a bit better. The humidity is staying right around the 30% mark for now, I know I can bump it into the 57-60% range with the other water pan on the top shelf, so I'll do that on lock down day and slowly uncover the pan to expose more water surface over the course of day 18 and 19....
I am not just hoping for, but expecting a much better hatch rate this go round. I just set 14 more AM eggs wednesday, so for the first time I actually had the 42 egg turner full for a couple days.
