I am one for recycling, and this is my latest project. I used a 1X4 long enough to mount 6 -64 ounce empty, plastic juice-bottles, on each side of the board. I cut a semi-oval out of the upper portion, and use the removed piece, as a shim, to reinforce the bottle, that is mounted with two screws, to the board. My idea is to put feed on one side, and water on the other. I have used bottles, cut with this opening, as feeders in portable cages, that I use at swap meets, with satisfactory results. This project is hard to tip over, even when empty. Each bottle will still hold about a quart, of water or feed. We go thru a lot of juice, so have plenty of empties on hand.
Hope everyone is bundled up somewhere safe dry and warm while this Blizzard moves through. I got to work at 9am this morning (I normally work 1400-2200) soo yea I knew someone would have to call in due to the weather and since my DH has to be here due to Weather
So while we drove home ok when we went to park in our driveway (just the tip at the top since our driveway is a hill) the car slid down the driveway side ways thank the Gods by their grace we didn't hit our stone wall or trees but ended up parked half in our friends Vonnie's yard but she didn't care she was just so glad we didn't wreck. Thank you the chicks are doing great and I can't wait to get busy on my Toad project this Spring now that I have the Heavy Big Breeds I wanted to use in it.