Consolidated Kansas

oh that is a fabulous idea about making a little miniature "lean to" or puzzle maze entry for the chickens on the OUTside of the coop. Where their pop door opens-- then you can built the new "entry way" but make it at a direct 90 degree angle against the coop, and a bit smaller and narrow. No doggie going in the door! What a great idea! It doesn't even have to be all that well built-- just enough that it will hold up to Lily trying to get in it. Could even use some old scrap OSB or sheet metal-- whatever you have on hand. Maybe just pound in a stake into the ground to put the boards on with... Love that idea! Maybe it could even be made out of chicken wire??? A chicken wire tunnel leading up to the pop door?? Just something tied well onto the coop and too small or too right of an angle for her to get into.

We have a shock collar too. I would never have bought one or ever thought of a reason for one-- but our shih tzu has a one track mind and she will run off the second she is outside. All the yelling and screaming won't make her stop and come back! She has come close to being hit and another time about dinner for the scary mean dog a ways down the road. Anyway, the second she high tails it, I shock her. She immediately stops and turns around and comes back. I don't even have it set very high. The one I have has settings from "1 to 10". We set her on a 3 because she is VERY obstinate! (10 is the highest and not recommended unless it's a very big dog or has a LOT of fur in the way)

Danz, can't wait to see your puppy pics! That must feel wonderful to have so much more room in your serama house and be quieter. :) Could you build your pens 3 or 4 feet high? Even at that, you could put a roost across a foot or so up and they'd be happy. Maybe use the metal T posts and wrap the wire around those-- and then use the wall of one pen for the other? That would be cheap and fulfill your needs in a pinch, right? Maybe?? You'd probably have to build a gate for each opening, though. The roost could just be slid thru the wire openings...?
 
Oh & the other thing I'm contemplating is that Candace gave me an idea for making some more rabbit cages maybe fairly easily. I will need to clean off the shelf unit in the garage & do something with that stuff, but I'm thinking of making cages inside the areas where the shelves are, just hooking wire to the outside of the shelf unit on each area by screwing the wire onto the shelf support & using a washer to hold it. The only thing I haven't figured out is how to put a tray underneath each one that is removable to hold the droppings for each cage. Anybody got any ideas for me on that? I'm just trying to come up with some cage space without spending too much money right now. I know there will be some cheaper cages at the swaps in April, but I need some more cages now.
 
checoukan, I liked your idea, but it unfortunately won't work with my setup. I have my whole run covered with tarp for the winter & it would kind of be a mess to have to cut a hole & i really don't want to. I'm not sure how I could make it work either with how my run is built. I'm just afraid too that if the dogs found out there was an opening they would just tear up the run trying to get in there. Then I would really be furious, so I think I"m going to have to go with IVY's idea with the livestock panel gate. I wish they had not learned to eat eggs OR chicken feed. Now I know why I have been going through so much feed though.
 







Here are some pictures I took of Marshmallows pups today. They are growing like weeds and nice and fat. Can't wait for their eyes to open!
 
Last edited:
OMG.. cuteness overload!!!!
droolin.gif
 
Trish I have used several things, and it just depends on what I have that I can make hinges out of. I have used big staples if the gate is not too large. You have to be sure to line them up straight, and leave them out just far enough that the panel can turn inside them. We have also used big old hinges from the barn. It might be kind of hard for you to do unless you have a way to bend the metal, but what we have done is take an old barn hinge, one side nails to the wood on the frame of the doorway, and the other you BEND into a loop around the panel. If you can't bend the hinge in a circle around the wire of the panel, then just bend that side of the hinge around the panel and then fasten it back to itself with a bolt and nut or baling wire if you have to. For lighter weight gates inside I have even used just pieces of heavy leather. I think that wouldn't work for your cattle panel, though. Different panels have different sized holes, so be sure the pups can't get through the size you are going to use and that the chicken can before you go through the work of cutting them. It is stiff wire, and it takes a pretty good sized bolt cutter and a heavy hand to cut them. I have also used a hand held Makita grinder to cut the panels, too, when my hands weren't strong enough to cut the wire.

Gotta get to work. Good luck. I hope it works for you.

Danz-
love.gif
love.gif
love.gif
love.gif
love.gif
love.gif
love.gif
Now how the heck am I going to choose?????????
 

New posts New threads Active threads

Back
Top Bottom