Day 18 and I can't get the turner trays out!

[rockerchik]

Ok, so I lost my intructions for my Little Giant incubator and turner. I'm not sure how to get the egg trays out of the turner. I made the mistake of setting two different sets of eggs, So now half of them are on day 18 and the other half have another week. Can anyone relate? I think I've gone chicken crazy! Anyone still have instructions?

 

[rebelcowboysnb]

Pull all the little gray clips an slide connecting rod off then pull the white strips off an the egg trays should slide out. You must leave the 2 or 3 closest to the motor in there. then put it back together. Make sure the motor arm is in its slot in the connecting rod.

 

[Emmalion]

if it is like the turner i have all you need to do is unscrew the motor and the trays will fall out. Place the trays you would like back in and put the motor back on. Its simple just 2 screws.

 

[Emmalion]

Actually here is a how to

http://www.ehow.com/how_4822868_clean-egg-turner.html its for cleaning but it shows you how to take it apart

 

[rockerchik]

Thanks so much for the info. All is good in chick land. Just waiting.