Quote:
I've used hardware cloth. On the side of hinges I go from the door panel to wall and attach it with hog rings so there is some flex.
On the top and bottom, I used hardware cloth and ran it across the top and bottom on the inside of the run so that the door could only open out. Anything trying to push in can't get pass the hardware cloth.
On the side where the latch snaps down, I attached the hardware cloth to the main frame pole and the door frame pole and made it bow out so that the door presses into it making it really snug. I ran a wire tie between the 2 posts to keep the wire from slipping around.
Hope I explained that well enough
PS so far nothing has gotten in except a rat that climbed through the chain link it self