grannys gone and done it

[fire370]

Is that what you use sally a 200 watt ? because I dont think I have ever seen them. my heat lights outside in the brooders are 125 and 250 and they blow very fast

I think CC meant (2) 100w bulbs.

 

[Granny Hatchet]

I think CC meant (2) 100w bulbs.

oh, lol Im trying to keep up.

 

[Sally Sunshine]

I think CC meant (2) 100w bulbs.

yep he did

 

[BYC910]

granny! what do I use? and what did Louly just do!!! perfect hatch in the NOTHINGBUTALIGHTOBATOR!

ok here is the deal granny is your fan li the one in salts picture ? if so you will need to set i9t up just like that in the top you will need to have just a flat sheet of metal with a hole for the fan and heating element .sallys picture is the way you don't have enough room for big fan but it is what you have then you have to make it work the fan and heater go inside the cabinet it has to look similar to that .

 

[Granny Hatchet]

ok, so Im not against using light bulbs It would be easier for me to wire as I know how but would I then have to have 2 fans as well ?

 

[Sally Sunshine]

ok, so Im not against using light bulbs It would be easier for me to wire as I know how but would I then have to have 2 fans as well ?

I would def use two of the ones that I showed and have in mine and two lights, or a bit more powered fan and this

 

[rIrs roost]

Oh boy. This sounds hard. Good luck Granny. I may just have to find some pennies to save. Probably not though. I'll probably attempt this sooner or later and blow up some more eggs.

 

[Sally Sunshine]

you need the fan to blow the heat off the bulbs and send it around and down so you can keep the entire thing the same temps inside. not enough fan it will be cold on the bottom, too much and you dry out, plus that fan is big but could be usable if blowing front like my cooler I just showed. but room is the issue.

 

[Granny Hatchet]

I would def use two of the ones that I showed and have in mine and two lights, or a bit more powered fan and this

Is my fan not strong enough for this set up ? My fan is on a power supply, I dont know how yours are wired .

 

[Sally Sunshine]

Is my fan not strong enough for this set up ? My fan is on a power supply, I dont know how yours are wired .

if it fits and blows front to the door and over the bulbs it will work.