I have set up an HHD incubator but I cannot get the setting right ? Can anyone tell me what each set

Thank you. I have set the temp to 37.5 but can only reach 33.4, I have had to set CAU at 9.9 to get the temperature up, ? The temperature has only been 22.6 until I did this ? I am now very worried.
 
Thank you, I have had to set the CAU at 9.9 or the temperature drops, its only reading 33.4c now, I can't get it any higher.The temperature is set at 37.5 but is not reaching it.?
Do you have a standard thermometer you can add to be sure? With this incubator, you don't want to trust the built in thermometer, because it's inaccurate.
 
Don't worry about the temperature being low, get it up if you can, hopefully. The chicks may still develop but be a little slow in developing and hatch a couple of days late. What day are you on and what is your hygrometer reading?
 
Try covering it with a towel to help hold the heat in but able to read your display. It may help. I have done that with a similar incubator.
 
Here's the video I made. First how to video I ever made, so it's not the best. I got somethings backwards a couple times, but I corrected myself. I hope it doesn't confuse you too much.
 
How did your hatch go? I hear if it is not keeping heat, you can leave it in it's foam. I had luck with mine last year, eggs set in March. I want to set again this year, last year, I had to lower the sensor so it was the same level as eggs, and put in my own thermometers but that worked out okay. This year hatching in March.
 

New posts New threads Active threads

Back
Top Bottom