• giveaway ENDS SOON! Cutest Baby Fowl Photo Contest: Win a Brinsea Maxi 24 EX Connect CLICK HERE!

possibly the best idea we have had yet! new waterer concept

It's too bad you didn't know about "street ells" or street elbows" before you cut all those "1-1/2 inch extensions" to fit your elbows to the tees. The street ells would fit right into the tees.

74542_streetl.jpg
 
Suscribing because I want to see the final set up. I a bit confused. If you attatch the 5 gal bucket to the pipe, how will you fill it and flip it upside down to create the vacuum pressure?
 
we will be attaching the system to a sealed bucket, but we are installing 2 shut off valves so we can refill it without it all running into the coop. one valve will be on the 1/2 inch pvc bfore the pipe converts to 1 1/2 inch and the other valve is going to be on the top of the bucket so I can hook the hose to it(this is the plan at this point). I am so tired of having to flip the waterer that we use now, we really wanted to figure a different method. but this is definitely trial and error at this point, bcause we don't know anyone with anything similar to this "model"
 
Awesome... I wonder if I can do this at a 2 inch setting so the rabbits can drink too- and just have a screw on end on one side and run the hose into the other - then all we'd have to do is trun on the hose
 
5 gallon bucket with lid, stock tank water valve with float.

Cut 3" dia hole is side of bucket, install water valve, hook to hose.

Total cost under $20 depending on if you got a bucket on hand.
 

New posts New threads Active threads

Back
Top Bottom