shaelyn
Hatching
- Jul 21, 2015
- 8
- 1
- 9
Thanks so much! I absolutely love it and how easy it is to clean. With sand on the floor and a linoleum poop tray, it's been a breeze.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Here is our coop that we built out of pallets. My husband and I are the opposite of handy, so I'm so proud of ourselves. We saw a similar coop online and just went off of their pictures to build our own. Our only tools were a drill, staple gun and jig saw, so I'm really pleased with how it turned out.![]()
![]()
![]()
![]()
Quote:
those staples are ingeneous... they are designed to travel at an angle in the wood in opposite directions makeing them very difficult to pull out.....
I also use screws and fender washers for A LOT of fastening projects from weak splitty woood to thin sheet metal to wire.... Even plastic...
deb
Very nice! What's the fan for outside the coop?Here's my coop/run. The footprint is 6x10; the run has a 2 foot apron. Every opening is covered with 1/2 inch mesh pneumatic stapled on. The primary run is covered with roofing. There is a secondary run walled in by the chain link fence in the back, and the green house, coop, and fill in fencing/gate. So that makes a total footprint of 180 sq feet. The secondary area is covered with netting and only used in the day. There is an Ador1 automatic door between the primary coop/run and the secondary run. Thanks for looking! View of coop/run part of secondary run and then the greenhouse visible on the right.Side of primary coop/run with gate to secondary run on left.
![]()
Very nice! What's the fan for outside the coop?
Quote: If you have another heat wave they make Box fan hangers for horse stalls... Just a couple of wire hooks But they hold the fan very nicely up against the wire.... gets stuff off the floor for safety.
nice Build by the way...
deb
Thank you, and I'm going to check those out!If you have another heat wave they make Box fan hangers for horse stalls... Just a couple of wire hooks But they hold the fan very nicely up against the wire.... gets stuff off the floor for safety.
nice Build by the way...
deb