Another Pallet Wood Protective Cover For Raised Beds
I have been busy planting stuff out in my raised beds the past few days. One problem that I have this year is that something is getting into the raised beds and digging around the topsoil. I suspect it is squirrels looking to dig up and eat the seeds I plant. But it could be birds as well.
In any case, I just planted beans in my elevated sub-irrigated planter. I did not want either birds or squirrels digging up the seeds and eating them. So, I built another protective cover with chicken wire to cover my beds. I expect it will be on the planter for maybe 3 or 4 weeks and then I will have to take it off for the bean plants as they grow too tall.
Here is a picture of a 2X4 foot pallet wood frame with chicken wire that I built today to put on my elevated planter...
Side view of same setup...
I want to point out that I am using those notched out 2X4 stretchers from the pallets that so many people just throw away. In this case, those notches make the cover both lighter in weight and easier to carry. Also, I used about the worst 2X4 stretchers I had in my pile of pallet wood for this project. You just don't need the best quality wood for these temporary protective covers.

Yes, I have some of my pallet wood sorted out by quality. This project only needs of the lowest quality. It's a great time to use up those crooked and warped boards that are not good enough for other pallet projects!
My only concern at this point is that it might be possible for a squirrel to squeeze through those notches. The notches are about 1-1/2 inches tall and I read online that squirrels can get into a hole as small as 1-1/4 inches...
If that becomes a problem for me, I'll just tack on some scrap wood to the inside of the frame to cover the notch cutout.
Anyways, these protective covers are a nice way to keep the animals out of the raised beds and also a good way to use up some of my less than great 2X4 stretchers that I had laying around.
I used old 2-foot chicken wire from previous projects and maybe only 10 cents of new screws to put the framing together. If it keeps out the birds and squirrels from digging out my bean seeds, that is time and money well spent.

The other day, I found a brand-new 50-foot roll of 4-foot-tall chicken wire out in one of my sheds. So, I plan on making some 4X4 foot pallet wood protective frames as well in the next few weeks to put over my full-sized pallet wood raised beds.