Arielle they might start spotting over a few days.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I meant if they were stacked the warmer air might not have made it to all the ones underneath. I know still airs can have problems with hot and cold spots....
Quote:
I meant if they were stacked the warmer air might not have made it to all the ones underneath. I know still airs can have problems with hot and cold spots....
Which is why I wired a computer fan in to my still air LG . . . . and it is now stacked.To make room for todays hatchlings to run around-- that makes it ok , right?? lol![]()
Just for clarity, a still air is a misnomer. Just a designation to distinguish it from the fan model. Air actually does circulate to some extent as the holes in the base and the holes in the top allow for movement of fresh air. Perhaps nearest those holes are the cooler area . . . just a theory. I move my eggs all over, or rotate the lid.![]()
On top of the eggs is the 102 temp. SO the TOP varies by the size of the eggs, and if on a turner vs laying on the sides. Makes it rather complicated depending on the model and flexibility of how the eggs are set. ( Yah, I've been hatching too much. lol)
Have a look at the area of the pip-- I use my fingernails to open up the pip a bid so I can see if the beak is moving. SOmetimes they sleep. Sometimes they are gone. I tap on the egg hoping for a response. A sleeping chick doesn't respond- - so you might need to be patient a little longer. When I peel back the white membrane I look for the veining in the clear layer just under the white membrane. If I can easily see veining, I leave it alone-- I hate making it bleed when I open the shell too soon. All that blood needs to be absorbed until the veins are really hard to distinguish. Goes from a bright red tiny tube, to a dark red line. Not sure how else to describe it.I have had 2 pips for over 24 hours and nothing..... should I help? I think they might already be gone![]()
Which is why I wired a computer fan in to my still air LG . . . . and it is now stacked.To make room for todays hatchlings to run around-- that makes it ok , right?? lol
Just for clarity, a still air is a misnomer. Just a designation to distinguish it from the fan model. Air actually does circulate to some extent as the holes in the base and the holes in the top allow for movement of fresh air. Perhaps nearest those holes are the cooler area . . . just a theory. I move my eggs all over, or rotate the lid.![]()
On top of the eggs is the 102 temp. SO the TOP varies by the size of the eggs, and if on a turner vs laying on the sides. Makes it rather complicated depending on the model and flexibility of how the eggs are set. ( Yah, I've been hatching too much. lol)