Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
i want to buy an incubator but now reading these problems i dont know what on to get
I had that issue with my second machine and rare turkey eggs , they sent a replacement and it came broken contact the company . they may do better for you . my first one just crashed so i am done with these machines should of bought the brinsea like i wanted but NO i won one of these in a raffle and loved it till now . GoI bought this incubator about a month ago. Worked perfect for 21 days, then on hatch day, everything went wrong. First, condensation built up way too high in the incubator and water started collecting in the digital display, even with the humidity control all the way open. The humidity was so high, the chicks wouldn't dry. Then, about six chicks hatched and I noticed that they all had bloody beaks with blood dripping down their faces, so I started watching. When the chicks would stand up under the fan, the vent holes are so large, the chicks could stick their heads up into the fan. The fan blade would smack them in the head, breaking their beaks. This is a terrible design. I snatched the chicks out of the incubator and put them directly under the heat lamp to try to save as many as possible. Then the high temperature alarm started going off on the machine (saying it was 219 degrees), the candling lamp came on and none of the buttons worked. The fan was still running so I put a thermometer inside hoping that it would still run long enough to hatch the rest of my eggs. The temperature dropped to 79 degrees and stayed there. The machine was completely broken at that point and I'm returning it.
What did they offer for the grate? I just ordered my first one and now I’m concerned. ThanksThe fan wasn't the problem, it was the grate foot slipped thru. I contacted the company they were very responsive.
How do I contact the manufacturer? I can't seem to find their web siteContact the company, they will send u a cover for the fan.
How do I contact the manufacturer? I can't seem to find their web site
[email protected] is the email I used to contact them with questions. Unless you have a version 1, they fixed the primary complaints about this unit. I fortunately didn't have to go through the painful learning experience with version 1 and I have had great success with both the version 2 & 3. I attached the image of the old and new fan grates so you can compare yours. Good luck! Thank you for this picture. I helps a lot. My first time with a Nature Right 360... sure hope I have good results.