Lowskizz
Hatching
- May 2, 2024
- 4
- 0
- 7
Hello!
I just made my first still air incubator from wood scraps. The size is 20 x 18 x 16 (lenght, height, and width). Lightbulbs are both 50w and there are 2 holes on the sides of the incubator about 1 inch.
Was wondering if the lightbulb placement is okay and if there are other improvements i can do besides adding a fan
I just made my first still air incubator from wood scraps. The size is 20 x 18 x 16 (lenght, height, and width). Lightbulbs are both 50w and there are 2 holes on the sides of the incubator about 1 inch.
Was wondering if the lightbulb placement is okay and if there are other improvements i can do besides adding a fan