BastyPutt
Yes, your Polish is a cockerel...
Yeah I bought an old snowmobile trailer and enclosed the sides to use for our cardboard recycling.I am currently remodeling an old rabbit hutch (probably about 6 years old) and when I built it I used both poultry staples, hammered in, and a handheld staple gun. This hutch held up to multiple racoons in the past. I noticed: 1) Those poultry staples are NOT ever coming out, even though I want them to. We cut around them and covered them with trim this time around. 2) The staples I put in with the gun are not holding up and would have easily been infiltrated by a predator 3) The staples my husband put in with the same gun are dang strong! I had to really work to get them out. If I were adding anymore welded wire, I would have him staple them in with the gun. Maintenance is always a thing too. Check and re staple if needed.
. 2x4's and I used hardware cloth as siding to keep it light. I stapled every 2 or 3 squares vertically with just a 3/8 staple and that isn't going anywhere. I also believe the HWC would break before the staples ripped out.