grannys gone and done it

[Granny Hatchet]

no that is the sucker rod fence that we put up last year around about half of the big pasture.

ok what is sucker rod ?

 

[Kiki]

ok what is sucker rod ?

I think is has teeth!

 

[twisted-acres-farm]

Quote:
that has been there for about 40 years. and I plan on leaving it about 1 foot off the ground.

 

[Granny Hatchet]

solid steel they use in drilling wells most of what I got is 3/4 in thick and then some is 1/2 inch thick. they are 25 feet long and then have screw in connectors to attach the next section of rod to them

OHH I remember when you were doing that. Looks good.

 

[twisted-acres-farm]

Quote:
that has been there for about 40 years. and I plan on leaving it about 1 foot off the ground.

OOP quoted wrong post was referring about granny's comment about windbreaks.

 

[twisted-acres-farm]

Quote:
thank you and should keep the yaks and possible horse /s in

 

[Granny Hatchet]

OOP quoted wrong post was referring about granny's comment about windbreaks.

dont work. dont care, need air flow through not under or over . Extensive research here.

 

[twisted-acres-farm]

Quote: A sucker rod is a steel rod, typically between 25 and 30 feet (7 to 9 meters) in length, and threaded at both ends, used in the oil industry to join together the surface and downhole components of a reciprocating piston pump installed in an oil well.

 

[Granny Hatchet]

thank you and should keep the yaks and possible horse /s in

you gonna buy me a min horse ?

 

[twisted-acres-farm]

Quote:
well I am doing it anyway and then we shall see who wins.

the posts will be railroad ties and then ruff cut lumber that is 2in by 10 in as cross braces on which I will screw tin to. They are up all over here. and We do a ton of it down the first year I was here that was located down by the dairy barn.