you have a beautiful place to live and the plans look great. Good luck!
My New Barn
- Thread starter AK Michelle
- Start date
- Thread starter
- #172
It's Fair time in Alaska and we are balancing time spent on the barn with all the other activities that come with the Fair. We didn't enter any animals this year but there is still plenty to do... concerts, the parade, wandering aimlessly through throngs of strangers and hordes of vendors... I'm sure you all know what that's like
We have made some progress, all 3 pop doors are installed
yep, you heard me right, I said three.
During the construction phase, we had the builder leave space for the pop doors which hadn't arrived yet.
We checked and rechecked the website but didn't see any mention of how high the entire space needed to be. I was only able to find the dimensions for the actual pop door opening, which said 16.75", so the builder and I doubled that and added 4 or 5".... it wasn't enough
NO worries, we moved on to "Plan B" Spray Foam Removal who doesn't love a little demolition? So I found a hammer and a pry-bar and set to work. We moved to the other side of the stud and H2B measured and cut out the new opening. The spray foam was about 3" thick, but it's about like cutting through styrofoam, not that hard to do, but it is stuck like glue to the inside of the T-111 so I couldn't just run a knife around the edge and pull it out.
Since we were recreating our openings... We added a couple 2X4's under the doors to help reduce the amount of shaving that would be kicked out the door. Since the doors were designed to fit in a wall framed with studs 16" apart and our walls were framed with 24" studs, we simply followed the installation instructions and then added an extra stud to make the 16" frame.
We got some cans of spray foam and I foamed in around the door assemblies and in the spaces originally left without foam. We will be adding ply wood over the openings, although we've decided to make the panels that will cover over the doors in such a way that they can be easily opened back up later should the door need repair or maintenance. The doors are electric and will be on timers, plugged into the outlets that will be installed above each door, so opening and closing will be automatic. It's good to have an electrician in the family
The doors come with great little trim kits so they have a nice finished look.
Next we will break out the paint sprayer and use up all the leftover interior "off white" paints that we have taking up space in the garage.
Then comes the interior walls and trenching for the gas, water and electric lines from the house out to the barn. My yard is going to be totally wrecked... but it's for a good cause. I can landscape next year
We have made some progress, all 3 pop doors are installed
During the construction phase, we had the builder leave space for the pop doors which hadn't arrived yet.
We checked and rechecked the website but didn't see any mention of how high the entire space needed to be. I was only able to find the dimensions for the actual pop door opening, which said 16.75", so the builder and I doubled that and added 4 or 5".... it wasn't enough
NO worries, we moved on to "Plan B" Spray Foam Removal who doesn't love a little demolition? So I found a hammer and a pry-bar and set to work. We moved to the other side of the stud and H2B measured and cut out the new opening. The spray foam was about 3" thick, but it's about like cutting through styrofoam, not that hard to do, but it is stuck like glue to the inside of the T-111 so I couldn't just run a knife around the edge and pull it out.
Since we were recreating our openings... We added a couple 2X4's under the doors to help reduce the amount of shaving that would be kicked out the door. Since the doors were designed to fit in a wall framed with studs 16" apart and our walls were framed with 24" studs, we simply followed the installation instructions and then added an extra stud to make the 16" frame.
We got some cans of spray foam and I foamed in around the door assemblies and in the spaces originally left without foam. We will be adding ply wood over the openings, although we've decided to make the panels that will cover over the doors in such a way that they can be easily opened back up later should the door need repair or maintenance. The doors are electric and will be on timers, plugged into the outlets that will be installed above each door, so opening and closing will be automatic. It's good to have an electrician in the family
The doors come with great little trim kits so they have a nice finished look.
Next we will break out the paint sprayer and use up all the leftover interior "off white" paints that we have taking up space in the garage.
Then comes the interior walls and trenching for the gas, water and electric lines from the house out to the barn. My yard is going to be totally wrecked... but it's for a good cause. I can landscape next year
Last edited:
so far... so GREAT!!!!
those pop doors are neat- are those all electric?? They look it. This is really coming along! Your entire barn and coops will be done before I even finish my roof! LOL!! That will be so nice to have full utilities out there with the water, gas and electric.
- Thread starter
- #174
We decided if we are going to spend money making this building we were going to do it all, the right way, and if we ever want to use the barn for something other than chickens
we could.
Not that we ever would....
Not that we ever would....
Auto doors a MUST. I wouldn't want to go trudging through the winter snow in AK twice a day to open pop doors! (Brrrrrrrr)
It looks fabulous Michelle! Can't wait to see it with the interior walls! So what's the 3rd area for - who will be occupying it? (you have Icelandics and layers, right?)
It looks fabulous Michelle! Can't wait to see it with the interior walls! So what's the 3rd area for - who will be occupying it? (you have Icelandics and layers, right?)
- Jun 11, 2007
- 12,148
- 579
- 311
Michelle, your planning is so thorough, and your work so well done. Wow oh wow, are your chickens lucky. (And the gaited horses that Belle and I are going to bring when we come to live with you.)
- Thread starter
- #177
Quote:
Turkeys.
The whole bunch runs together for part of the year, then I will segregate for breeding season. I am adding some fenced runs for the layers and turkeys, I gave up any hope of containing my Icelandics
they are too smart to keep cooped up.
Turkeys.
The whole bunch runs together for part of the year, then I will segregate for breeding season. I am adding some fenced runs for the layers and turkeys, I gave up any hope of containing my Icelandics
i love it so much !
i painted my little 6*4 shed green and blue to try and make betty my BO happy - did not work. i put in shelves and a roost area she doesnt use it prefers to stay on the floor ! stubborn girl
bless least she is happy
i painted my little 6*4 shed green and blue to try and make betty my BO happy - did not work. i put in shelves and a roost area she doesnt use it prefers to stay on the floor ! stubborn girl
bless least she is happy
- Aug 29, 2011
- 43
- 0
- 32
WOW !!
Similar threads
New posts New threads Active threads
-
Latest threads
-
-
Raising Baby Chicks: What’s Your Go-To Method?- Started by BYC Project Manager
- Replies: 1
-
a lot of genetic questions. Also making barred tolbunts?
- Started by servant_of_fluffs
- Replies: 0
-
-
-
-
Threads with more replies in the last 15 days
-
-
BYC Software Update 2025- Started by Nifty-Chicken
- Replies: 173
-
-
Question of the Day - Tuesday, September 16th, 2025- Started by casportpony
- Replies: 62
-
Students need help identifying our chickens- Started by Cluckle
- Replies: 54
-
