New coop build

SebashtionH

In the Brooder
5 Years
Oct 1, 2014
68
10
43
Spring Hill Florida
700



Well since the fire of 2014 took out my almost finished coop, I figured to change the coop up a bit...
a friend of mine posted a link to a coop. I went to the site and this coop was awesome!!!!! I contacted the site and they only build the coops not sell plans. Now being a builder I didn't want to buy a pre fab coop, especially a $3,000 some coop plus shipping.
so I sat down and designed a coop inspired from that one....
Will start the build here beginning of February
 
Last edited:
Got the main truss up and painted...

700


Put the plywood on the coop area.

700


Then put the shingles and main roof on...

700



Also have the ramps painted and drying.

700


Its coming together now to hang roosts hardware cloth and doors!!!!!

All the bare dirt around the coop once it is done, I am planting clover and chick weed for them to have more to snack on :)
 
Last edited:
Why these individual doors? Maybe I should read back.
Would like to see it
I had him make the 4 sides and top. I will add the bottom, doors and mesh.
30" x 72" x 36" tall, 5/4 stock. Made it taller more for my access than chick space.
I like side access and 30" is about all I can reach comfortably.
Couple dozen screws and the whole thing breaks down to store flat.
Here's it is after making and fitting the doors, have about half the mesh installed but no more pics yet.
 
I was looking at the cleaning for the other coop and with a 5ftx6ft hen box I would have to climb in to clean it on my knees, and that just didn't seem like a lot of fun.....don't get me wrong I was happy with the other coop but being that I had to start over there are always tweaks you want to do to finished projects and this time I could.
This coop the Nesting Boxes are down the one side and the coops are down the other side. I would be able to walk right down the middle and reach everything :) coop dims are 8ftx12ft and like 71/2ft high at the highest point.
 
I was looking at the cleaning for the other coop and with a 5ftx6ft hen box I would have to climb in to clean it on my knees, and that just didn't seem like a lot of fun.....don't get me wrong I was happy with the other coop but being that I had to start over there are always tweaks you want to do to finished projects and this time I could.
This coop the Nesting Boxes are down the one side and the coops are down the other side. I would be able to walk right down the middle and reach everything :) coop dims are 8ftx12ft and like 71/2ft high at the highest point.
I don't understand the layout. Are there individual "coops" down one side, or is it one big coop. Where do the chickens roost?
 
Hm, I suppose being in Florida (I think that's what you said in your other thread), you could get away with having the nest boxes separated, since you won't be dealing with sub freezing temperatures. We've had below zero all week here, and my hens have all been wanting to squeeze together into the same box for warmth, so I'm glad they can do that. They won't budge outside the coop right now.

Will you HAVE to walk through the middle of the run to access the nests, or will you also have access from outside?

I agree with you about the hands and knees thing. Since elevated coops aren't walk-ins, it makes sense to keep them narrow enough to reach the middle. When I built mine, I also made sure to paint as many of the pieces as possible before assembling them, because I did not want to have to be on my hands and knees, contorting myself to paint the interior.

Looking forward to following your new build.
 
Hm, I suppose being in Florida (I think that's what you said in your other thread), you could get away with having the nest boxes separated, since you won't be dealing with sub freezing temperatures. We've had below zero all week here, and my hens have all been wanting to squeeze together into the same box for warmth, so I'm glad they can do that. They won't budge outside the coop right now.

Will you HAVE to walk through the middle of the run to access the nests, or will you also have access from outside?

I agree with you about the hands and knees thing. Since elevated coops aren't walk-ins, it makes sense to keep them narrow enough to reach the middle. When I built mine, I also made sure to paint as many of the pieces as possible before assembling them, because I did not want to have to be on my hands and knees, contorting myself to paint the interior.

Looking forward to following your new build.

Yes in Florida so no snow or subzero temps......... yes walk right down the middle of the coop and have access to but the coop and the nesting boxes. I was going to have access to the nesting boxes from the out side but thought that was just a waste of hardware in this design being the nest boxes have fold down faces inside the coop.
 

New posts New threads Active threads

Back
Top Bottom