Nurture Right 360 and humidity

[Shannonw1228]

I do safety holes in anything that has internally pipped for more than 24 hours without an external pip...unless they have very large air cells, I may give them a bit longer. If the air cells are on the small side, I may do safe holes sooner. Just a tiny hole and pierce the membrane, just so they get some external air.

OK they are larger then other and larger air cells also. Thank you!!

 

[Mariahthechickenlady]

Hi there! First time posting here, but I pulled out my nurture right 360 out of storage, got it all set up, and it’s reading 8.8.8.8 in both the temp and humidity. Ive tried resetting with no luck. Any ideas?

 

[cavemanrich]

Hi there! First time posting here, but I pulled out my nurture right 360 out of storage, got it all set up, and it’s reading 8.8.8.8 in both the temp and humidity. Ive tried resetting with no luck. Any ideas?

Go to this link and read how some members reset their settings. It can get tricky sometimes.
I also think that since in storage,,, the electronics could have gone dormant. Having it plugged in for a while may have things shake out on their own. Then you may be able to do correct resets.
https://www.backyardchickens.com/th...ew-incubatorists-advice.1402878/post-23024953

There are many postings in the thread above,, so maybe you can find answer there.

Willow2253​

That is your posting I linked. Maybe you have some advice??

WISHING YOU BEST,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,and