thegreatwhite
Chirping
if there are any particular parts you want better or more close ups on, let me know, i'll get them tomorrow for you when its daylight again
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
it ended up using about 200 screws with the neoprene washers. i cut everything so that the roofing overhangs the structure by an inch and a half and if you notice in the photo of the front, they make a contoured foam for the roofing and i used that to secure the gaps at the front and rear walls of the run to keep critters out and along the sidewalls i just put strips of the 1*2's between the pearlngs and it happend to land under a valley so it sealed itself basically. the pearlings are every 24 inches on center and the roofing is screwed into them on every other rib.
Yes, the foam stuff is what I'm thinking of. that helps. My cross 2x2s are 27" on center, with a total area of 12x8' to cover.
A friend thinks some plywood down 1st would make installation easier - thoughts? I'm trying to post a pic to give you an idea.
Silly question: did you climb on top of throof to screw things in?
If NC wasn't so far away, I'd come over and help youI have questions!!! We are building this week actually and I need this roof! Is anyone on here that can help us? My chicks are getting too big to be in my garage now