Ok. So here is the story behind this incubator.
I had a friend bring by a dickey incubator. I wanted to build one. After seeing the bator i wanted to customize it to me so i added a few extras. The first thing that had to go was the 1/2" plywood, so i built mine with 13/16" cabnet grade heart...
Here is a sneek peek at the walnut incubator that i will be bringing to the swap this saterday. I just finished the cabnet. Tomorrow i work on the egg turner and electrical.
Sorry the flash takes away from the true color.
Here is the interior without the turner. I'm going to make this a 144...
Here is our attempt at a Dickey's incubator, It's a six egg tray auto turning incubator with a hatching tray. Temperature and humidity regulate very well. The cabinet is made out of solid 11/16 pine and the doors are both raised panels, the front door is 1/4 glass. It is sealed with 5 coats of...
I Tried to cut cost by putting in a metal plate instead of plexiglass. I like being able to control whats on and whats off not to mention knowing at a glance what is running at that time. i defiantly wanted to put the turner switch close to the door. With the dickey i had to goto the back of the...
Ok, here are my jersey giants i need to sell. I have 1 beauiful rooster and 3 laying hens. The rooster is a loud crower but he usually sleeps in until 8:30 or 9:00, her is black,green, and red. He is a pure breed. The hens are the same age ( i bought them as chicks in the spring of this year)...
Here are some other pictures for you to view. This is a chicken tracktor and what you do is to crank the boat wintches until the coop is clear of the ground then add a couple 6' 2x4s then push it around.
This is a fully divided coop. i have rhode islands on one side and jersy giants on the...