- Thread starter
- #71
chickachickayea
Songster
I guess I'd just cut a hole in the siding that's 10 3/4"h x 16 3/4"w.
Put flashing at top of hole, use 2x2's inside to support weight of window, and caulk window to inside of siding.
.There's more but hard to type it out, could make you a drawing, but not today.
@aart You are too good to us here!
I think I understand what you're saying though... Cut the hole slightly smaller than the window and fit it in so it has the siding to act as the flange that it's missing.
Tomorrow we are going to try to get the run done... I made a checklist about a mile long that I'm hoping we can get through with little or no trouble. I'm also really hoping it doesn't rain on Sunday so we have an extra day to work if needed.
My one roadblock is how to secure the bottom of the shed since it is raised up on 4x4s? Attach HC to the side and make an apron onto the stone? Attach some PT wood of some kind? I'd like it blocked off to predators and potential chicks.
Thank you everyone again!