P&I PI12/24 Incubator Help

[Highlandcow]

I have just started using one of these & have the FFF LCD display. Have tried turning it on & off about 3 times, hopefully it will cure the problem!!

 

[tiredt]

hi i have the PI24 P&I Incubator would anybody know how to reset it to factory setting please, was going great untill day of hatching and suddenly its only blowing cold air saying its too hot , indicating temperatures 40-42 but its freezing inside theres no way its too warm

we have had a few short power cuts so dont know if that caused it but even after having it unplugged for 12 hrs its still not resetting, think all my poor babies are dead

 

[lbadelphi]

Hi

Using the PI24

Just wondered if you ever discovered what the turning numbers meant 30, 45, 60, 75 & 90?????

We are incubating chicks & not quite sure if they mean minutes or turns per day.

also do you know where the Air level is 2 adjust the humidity

tia

Manual is a laugh

 

[Kiramet]

Hi,

just got mine yesterday and trying to learn things, but the manual is pretty... exciting?

Anyways, I think the turning numbers mean minutes, i.e. by choosing 90 it turns every 90 minutes.


~~~~~~~~
Kirsi
Finland

 

[riverside]

CAN SOMEONE PLEASE TELL ME WHAT THE TURNING NUMBERS MEAN, I HAVE EGGS WAITING TO PUT IN BUT DONT KNOW WHAT TO SET IT ON

 

[Daedalus62]

CAN SOMEONE PLEASE TELL ME WHAT THE TURNING NUMBERS MEAN, I HAVE EGGS WAITING TO PUT IN BUT DONT KNOW WHAT TO SET IT ON

...

Anyways, I think the turning numbers mean minutes, i.e. by choosing 90 it turns every 90 minutes.

 

[riverside]

that seems rather a lot of turns in a day

 

[Junibutt]

How does one get it to display humidity.

 

[Kiramet]

My model does not show humidity, so I have a separate hygrometer.

My model does not have automatic egg turning either.

 

[Junibutt]

My model does not show humidity, so I have a separate hygrometer.

My model does not have automatic egg turning either.

Yes I finally found out it does not have a humidity display. The hygrometer is so hard to see from outside on this unit. I had to use a candling light to check the numbers.

Do have to say that it maintains temperature and humidity very well. I had all the channels filled up yesterday and humidity is at 83% and sticking around that. I will have to blot some water out now.