Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What I did both times was wait until the other eggs hatched before assisting the ones that pipped. Since they pipped, they could breathe so they have time. They MAY be able to hatch on their own, but if not....
You need to get your humidity up to 75% or more in the room your bator is in. I would also bump humidity in bator to 80%. Get yourself a pair of tweezers, some qtips and warm water. If you have eyebrow scissors, those are helpful too. Use watered down qtip to moisten membrane. Then, VERY slowly take teeny pieces of shell away from egg with tweezers , making sure to also remove membrane underneath. The scissors help to cut off peeled away pieces of membrane. As soon as you see the first sign of blood, put back into bator and wait 30 minutes to an hour. Then repeat process over and over and over. Do NOT rush and try to remove shell in 1 or 2 sessions.
One needing to assist a hatch I refer to the sticky at the top of the goose thread. Pete's hatching guide really and truly is the best walk through for anyone hatching waterfowl. It gives step by step with images so you can't go wrong. Only thing I will say is, GO SLOW! Waterfowl hatch slowly, not fast like chickens, so you have to move very slow when assisting.
I have read that up post, down and sideways, and I guess at this pojnt, I need to wait. They just pipped today, so I need to give them at least another 12 hours before I do anything further.